Defined by precision.
Delivered with excellence.

Roofing, chimneys, gutters, skylights, and flashing across New York.

Warranty Options for WorkmanshipAsk which coverage applies — up to 8 years on qualifying roofing work
Request an Estimate Why choose Precision
Call 914-313-7764 Text us
Services

Everything above the foundation.

Roofing

Roof Repair

For a specific problem on a roof that's otherwise in good shape.

You probably need this if
You have a leak or a stain on the ceiling, missing or lifted shingles after a storm, or damage in one area of the roof.
What happens
We find where the water is actually getting in — which is often not where the stain is — fix that section, and check the areas around it so the same leak doesn't come back somewhere else.
Roofing

Full Roof Replacement

For a roof at the end of its life, or one with damage in too many places to patch.

You probably need this if
Your roof is 20+ years old, you're patching leaks repeatedly, shingles are curling or losing their granules, or the roof is sagging.
What happens
The existing roof is removed so the wood decking beneath can be fully inspected and any damaged areas addressed. Ice and water shield is then installed at valleys and other vulnerable areas where needed, followed by roofing felt or underlayment. Your selected shingles or roofing material are installed next, with new flashing completed at chimneys, skylights, walls, and other transitions. We finish with a thorough cleanup of the jobsite.

Roofing

Repairs and full replacements on all roof types, plus storm damage assessment and help documenting it for an insurance claim.

  • Leak repair
  • Full replacement
  • Storm & insurance inspections

Chimney & Masonry

Before and after chimney masonry repair, showing a cracked crown replaced with a clean rebuilt crown BeforeAfter

Crumbling mortar and cracked crowns let water run straight down inside the chimney. We rebuild and reseal the masonry so it sheds water again.

  • Mortar & repointing
  • Chimney crowns
  • Rebuilds & masonry repair

Flashing

Side-view before and after of a brick chimney, showing rusted damaged flashing replaced with copper step flashing tucked beneath shingles BeforeAfter

Flashing is the metal that seals the seams where your roof meets a chimney, wall, or window. It's where most leaks actually start — and it's the part we specialize in.

  • Chimney flashing
  • Skylight flashing
  • Window flashing
  • Wall joint & step flashing

Skylights

Before and after skylight replacement, showing an old weathered skylight replaced with a new skylight BeforeAfter

New skylights installed, and leaking ones resealed or replaced. A skylight only stays dry if the metal around it is done right, so we handle both together.

  • New installation
  • Replacement & resealing

Gutters

Before and after copper gutter installation, showing naturally aged brown copper replaced with polished new copper gutters BeforeAfter

Gutters carry water away from your foundation. If they're clogged, sagging, or the wrong size, that water ends up in your basement instead.

  • Installation & replacement
  • Repairs & resecuring
  • Cleaning & guards

Power Washing

Before and after power washing, showing a lightly weathered patio refreshed to clean natural stone BeforeAfter

Removes the green and black buildup from siding, walkways, and decks. We match the pressure to the surface so nothing gets damaged in the process.

  • Siding & exterior panels
  • Roof & gutter washing
  • Decks, walkways & driveways

If it's on the outside of the house, Precision can handle it — ask about anything you don't see listed.

Roof Leak Advice

Most roof leaks start at a detail—not in the middle of the roof.

A ceiling stain is often only where water finally appears. The source may be higher up at a chimney, skylight, wall joint, valley, or roof edge.

What to Expect

A clear process from first message to finished work.

01 — Reach out

Call or text.

Tell us what you are seeing and what you need help with.

02 — Assess

On-site evaluation.

We inspect the area, identify the issue, and discuss practical options.

03 — Plan

Clear estimate.

You receive a straightforward scope of work before the job moves forward.

04 — Complete

Quality work.

We complete the work carefully, keep the site tidy, and communicate along the way.

05 — Review

Final walk-through.

We review the completed work with you and make sure everything looks right.

Recent Work

Before and after.

Before
Add photo
After
Completed roof

[Project name or street] — [Town], CT

[Full roof replacement]
Before
Add photo
After
Add photo

[Project name or street] — [Town], CT

[Chimney rebuild & flashing]
The Precision Standard

Experienced work, done carefully for the home you love.

01 — 10+ years of experience

Roofing knowledge you can count on.

With more than a decade of hands-on roofing experience, we bring informed judgment to every repair, replacement, and exterior detail.

02 — Full exterior expertise

More than just shingles.

From all types of roof shingles to gutters, chimneys, flashing, and skylights, we understand how every part of your exterior needs to work together.

03 — Understand first

Clear, practical assessments.

We look for the real source of the problem before recommending a repair, so you know what needs attention, why it matters, and what to expect.

04 — Never rushed

A focused crew, not a crowded jobsite.

We do not rush through your home with a large crew where nobody knows who is responsible. Every detail is approached with patience, care, and purpose.

05 — Precision in every detail

Work built to hold up.

Waterproofing, clean finishes, and the small details that protect your home receive the same attention as the work you can see from the street.

06 — A relationship you can rely on

Professional, personal, and accountable.

We want you to feel comfortable calling us, asking questions, and trusting the work. Your satisfaction and a lasting relationship matter just as much as completing the job.

About

The work you can't see is the work that matters.

Precision has spent more than 10 years working on homes across Fairfield County, Connecticut and Westchester County, New York — roofs, chimneys, gutters, flashing, and everything in between. Every job is handled directly, with no subcontracted crews and no corners cut on the details that don't show.

Most leaks don't start with the shingles. They start at a chimney, a skylight, or a wall joint that was flashed in a hurry. That's the part of the job Precision is built around.

0Years of Experience
0Projects Completed
Countless Leaks Stopped
Portfolio

Craftsmanship you can see.

Every project is approached with care—from the visible finish to the details built to keep water out.

Roofing Project
Existing worn shingle roof before replacement in StamfordBefore
Roof decking exposed after the old roofing materials were removedOld Roof Removed
Ice and water shield installed at the roof baseIce & Water Shield
Waterproofing system installed at the chimney before new shinglesWeatherproofing
Finished new shingle roof in StamfordNew Shingles
Copper flashing installed behind the stucco at the chimney roof transitionCopper Flashing
Roofing

Full roof replacement & concealed copper flashing

Stamford, Connecticut

A complete roof replacement combining a layered waterproofing system with the clean, concealed copper chimney detail requested by the client.

  1. The existing roof was removed to expose the roof deck and prepare the surface for a complete rebuild.
  2. Ice-and-water shield was installed along the base of the roof, where ice backup is most likely, followed by felt paper to continue the waterproofing system across the roof.
  3. New shingles were installed up to the ridge line. Custom copper flashing was then integrated behind the stucco, keeping the step-flashing detail concealed for the clean finished appearance the client preferred.
Waterproofing underlayment installed around a chimney during roof replacement in MamaroneckUnderlayment
Roofing underlayment installed across roof slopes in MamaroneckWaterproofing
Synthetic roofing underlayment secured before new shinglesUnderlayment
Roof edge and waterproofing detail prepared for new shingle installationDrip Edge Detail
Finished gray shingle roof in MamaroneckFinished Roof
Completed roof slope and chimney transition in MamaroneckFinished Detail
Completed gray shingle roofing systemFinished Roof
Completed roofing details around dormers and ridge linesRidge Detail
Completed roof ridge and vent detailFinished Detail
Completed Mamaroneck roof replacementFinished Roof
Roofing

Complete roof replacement & drainage detailing

Mamaroneck, New York

A full roof replacement built around a continuous waterproofing system, properly integrated edges, and a clean finished shingle installation.

  1. The existing roof was removed and the roof surface was prepared for a complete new system.
  2. Waterproof underlayment was installed across the roof, with reinforced protection at the eaves and other vulnerable transitions to help guard against wind-driven rain and ice backup.
  3. New shingles were installed with drip-edge metal integrated at the gutter line and along the roof edges, directing runoff into the gutters and protecting the side edges of the home.
Gutter ProjectGreenwich, Connecticut
Greenwich home with completed gutter workOverview
Copper downspout installed at the side of the Greenwich homeDownspout Placement
Copper gutter and downspout alignment at the garageAlignment
Completed copper gutter installation across the garage frontFinished
Polished copper gutter detail at the Greenwich homeCopper Detail
Finished copper downspout at the corner of the homeFinished
Gutters

Custom copper gutter replacement

Greenwich, Connecticut

A damaged gutter system was replaced with a custom-fit copper installation designed around the client’s preferred drainage locations.

  1. The damaged gutter was removed after the impact, and the roof-edge area was prepared for a clean replacement.
  2. New copper gutters and downspouts were placed at the locations selected by the client, then aligned for controlled drainage.
  3. The center of the gutter run was set slightly higher so water flows cleanly toward both end downspouts; the copper was brushed and cleaned for a spotless, lasting finish.
Chimney & Flashing Project
Before photo of a weathered chimney with trees behind itBefore
Chimney repair in progress with the crown opened and roof decking exposedIn Progress
Finished copper step flashing installed at the chimneyFinished
Chimney & Flashing

Chimney restoration & copper flashing

Scarsdale, New York

A three-stage restoration that protects the chimney and brings the roof transition back to a clean, durable finish.

  1. The chimney crown was opened and the failing material was carefully removed.
  2. The masonry joints and crown were rebuilt with fresh mortar for a solid, finished surface.
  3. Old flashing was removed and replaced with new copper flashing, sealed at the chimney-to-roof transition.
Original open roof valley before flashing work in New RochelleBefore
Copper valley flashing being formed between tile roof slopesFlashing Installed
New roof underlayment and copper valley flashing in progressWeatherproofing
Finished copper valley flashing beside a stone chimneyFinished
Chimney & Flashing

Copper valley flashing

New Rochelle, New York

A detailed valley restoration designed to guide water safely through the tile roof and away from vulnerable seams.

  1. The existing valley material was removed and the wood decking beneath was inspected before rebuilding.
  2. Ice-and-water protection and a new copper valley flashing were installed to create a durable waterproof path.
  3. Underlayment and surrounding tile details were reset cleanly around the finished valley and stone chimney transition.
Existing deteriorated chimney-side roof decking before restoration in New RochelleExisting Condition
New wood decking installed at the chimney-side roof transitionDecking Replaced
Completed roof decking preparation beside the chimneyDecking Complete
Ice and water protection being installed around the chimney roof areaIce & Water Shield
Roof preparation around the chimney before copper installationRoof Preparation
Waterproofed roof area prepared for the custom copper flashingWeatherproofed
Custom copper chimney cricket installed to redirect water away from the chimneyCopper Cricket
Front view of the finished custom copper chimney cricketFinished Copper
Finished copper flashing and chimney cricket detailFinished Detail
Chimney & Flashing

Chimney cricket & custom copper rebuild

New Rochelle, New York

A complete chimney-side roof rebuild designed to replace compromised materials and create a positive drainage path around the chimney.

  1. The existing roof area was opened, deteriorated wood decking was removed, and new decking was installed to provide a solid substrate for the rebuild.
  2. Ice-and-water protection was installed across the entire rebuilt area and integrated with the surrounding roof system for continuous waterproofing.
  3. Custom copper flashing and a new chimney cricket were fabricated and installed. The original design had no cricket; the new copper cricket redirects water away from the chimney instead of allowing it to collect against it.
Power Washing Project
Pelham home before roof cleaningBefore
Roof valley before cleaning in PelhamBefore Detail
Weathered roof surface before cleaningBefore Detail
Roof surface during the cleaning processCleaning
Cleaned roof surface detailAfter Detail
Pelham home after roof cleaningAfter
Completed Pelham roof cleaningAfter
Power Washing

Roof cleaning & exterior refresh

Pelham, New York

A careful roof-cleaning service that lifted organic buildup and refreshed the roof’s appearance while respecting the surrounding home and landscaping.

  1. The roof was inspected and the appropriate cleaning product was applied first to treat the surface buildup.
  2. The roof was carefully power washed in controlled sections to clean the slate surface and roof valleys.
  3. The finished roof was rinsed and checked for an even result, with before-and-after views showing the refreshed appearance.
Cedar shake roof overview in GreenwichAssessment
Cedar shake roof detail during serviceCleaning
Finished cedar shake roof in GreenwichFinished
Completed cedar shake roof with a clear driveway backgroundFinished
Power Washing

Cedar shake restoration

Greenwich, Connecticut

A complete cedar-shake care process focused on cleaning, repair, and protecting the natural look of the roof.

  1. The cedar shake roof was inspected carefully to identify any shakes needing attention before the cleaning process.
  2. The roof was power washed in controlled sections to remove surface buildup while protecting the surrounding property.
  3. Any needed shake repairs are completed, followed by a protective stain and sealer to restore and preserve the finish.
Weathered gray cedar shakes before cleaning in Cos CobBefore
Cedar shake roof during the cleaning processCleaning
Cedar shakes wet during cleaning, showing treated and untreated areasWet Stage
Cedar roof after surface cleaningCleaned
Cedar shakes drying to a natural golden toneDrying
Wide view of the cleaned cedar shake roofCleaned
Cedar shakes after dryingDrying
Cedar shake roof ready for final finishSealer Prep
Natural cedar shake finish detailSealed
Cedar shake roof after clear natural sealer applicationFinished
Completed cedar shake roof in Cos CobFinished
Power Washing

Cedar shake cleaning & natural sealer

Cos Cob, Connecticut

A full cedar renewal that brings a weathered shake roof back toward its warm, natural character while protecting the surrounding details.

  1. The roof was inspected first; any damaged shakes and flashing details needing repair were identified before cleaning began.
  2. Power washing removed the gray surface weathering and organic buildup. During the wet stage, the natural green mildew tone can be visible—the same appearance homeowners often notice after rain.
  3. After two to three dry-weather days, a clear oil-based natural shake sealer was applied to revive the golden cedar tone and leave a protected, naturally enriched finish.
Share Your Experience

Leave Precision Roofing a review.

Your feedback helps future homeowners choose a crew they can trust.

Submitting opens an email directly to Precision Roofing. Approved feedback can then be added to the site.

Safety & Training

Professional work begins with a safe, prepared crew.

Every project is approached with the safety of our crew, your home, and your family in mind. Our team is trained to work carefully, protect the property, and maintain an orderly jobsite from start to finish.

01 — Safety standards

OSHA-compliant practices.

Our crew follows OSHA-compliant work practices, jobsite awareness, and safe procedures designed for residential roofing work.

02 — Fall protection

NRCA fall protection training.

We use NRCA fall protection course principles, appropriate fall-arrest systems, and controlled work areas to help protect the crew at elevation.

03 — Torch work

CERTA-trained application.

CERTA—Certified Roofing Torch Applicator Program—training supports safe, informed handling of torch-applied roofing work when that system is required.

04 — Access

Ladder and access protocols.

Ladders, roof access points, and equipment placement are reviewed before work begins, helping keep the jobsite controlled and secure.

05 — Equipment

Proper tools, properly used.

Every crew member is trained to use roofing products, power tools, and jobsite equipment safely and with care around your home.

06 — Daily standards

A safety culture, every day.

Safety is not a one-time checklist. It is part of how the crew communicates, works, cleans, and looks out for the property throughout the job.

Uniformed and respectful

Our uniformed crew represents Precision professionally and treats your home, driveway, landscaping, and neighbors with respect.

Cleaned daily

We keep the site organized each day, remove debris, and do not leave dangerous materials or loose tools around the property.

Protection beyond the roof

From setup through final cleanup, we work to leave your property safe, tidy, and ready to enjoy when the job is complete.

Contact

Request an estimate.

Free, no-pressure. Most estimates are back within a couple of days.

PhoneCall 914-313-7764Text us
Emailprecisionroofingdesign@gmail.com
Instagram
@precision.roofing_ct QR code for Precision Roofing on Instagram
Service AreaFairfield County, Connecticut & Westchester County, New York